Installation - Zanussi ZOB12401 Manual De Instrucciones

Problem
The appliance does not operate.
The appliance does not operate.
The oven lamp does not operate.
Steam and condensation collect
on the food and in the oven.
If you cannot find a solution to the problem
yourself, contact your dealer or the service cen-
tre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Installation

Warning! Refer to the Safety chapters.
Building In
558
573
www.zanussi.com
Possible cause
The Minute Minder + End of
Cooking programmer is not set.
The fuse in the fuse box is re-
leased.
The oven lamp is defective.
You left the dish in the oven for
too long.
548
20
589
594
5
Set the Minute Minder + End of
Cooking programmer. Refer to the
chapter "Clock functions".
Do a check of the fuse. If the fuse
is released more than one time,
contact a qualified electrician.
Replace the oven lamp.
Do not keep the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking ends.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity.
.........................................
.........................................
.........................................
min. 550
20
590
min. 560
Remedy
13