Ibiza sound LC192DMX Manual Del Usuario página 10

3.4.3 CHECKING A CHASE
1) Press and hold the PROGRAM button until the LED is light.
2) Select the desired CHASE button
3) Press the TAPSYNC DISPLAY button to switch the LED display to steps.
4) Review each scene/step individually by using the BANK UP/DOWN buttons
3.4.4. EDIT CHASE (COPY BANK INTO CHASE)
1) Press and hold the PROGRAM button to enter programming mode.
2) Press the desired CHASE button
3) Select the BANK to be copied using the BANK UP/DOWN buttons.
4) Press MUSIC/BANK COPY button to prepare copy.
5) Press MIDI/ADD button to copy the bank. All LEDs will blink.
3.4.5 EDIT CHASE (COPY SCENE INTO CHASE)
1) Press and hold the PROGRAM button to enter programming mode.
2) Press the desired CHASE button.
3) Select the BANK that contains the scene to be copied using the BANK UP/DOWN
buttons.
4) Press the SCENE button that corresponds to the scene to be copied.
5) Press MIDI/ADD button to copy the scene.
All LEDs will blink.
3.4.6 EDIT CHASE (INSERT SCENE INTO A CHASE)
1) Press and hold the PROGRAM button to enter programming mode.
2) Press the desired CHASE button
3) Press the TAPSYNC DISPLAY button to switch the LED display to steps.
4) Use the BANK UP/DOWN buttons to navigate steps and locate the insert point of
the new scene. The display will read the step number.
5) Press MIDI/ADD button to prepare the insert.
6) Use the BANK UP/DOWN button to locate the SCENE.
7) Press the SCENE button that corresponds to the scene to be inserted.
8) Press MIDI/ADD button to insert the scene.
All LEDs will blink.
3.4.7 DELETE A SCENE IN A CHASE
1) Press and hold the PROGRAM button to enter programming mode.
2) Press the desired CHASE button that contains the scene to be deleted.
3) Press the TAPSYNC DISPLAY button to switch the LED display to steps
4) Select the scene/step to be deleted using the BANK UP/DOWN buttons
5) Press AUTO DEL button to delete the step/scene. All LEDs will blink.
©Copyright Lotronic 2014 Manual LC192DMX 10