3.4.8 DELETE A CHASE
1) Press and hold the PROGRAM button to enter programming mode.
2) Press the CHASE button (1~6) to be deleted
3) Press and hold AUTO DEL button and the respective CHASE button to delete the
chase. All LEDs will blink
3.4.9 DELETE ALL CHASE PROGRAMS
CAUTION! This procedure will result in irrevocable loss of chase step memory. The
individual scenes and program banks will be preserved.
1)
Turn the controller OFF. Press and hold the BANK DOWN button and the AUTO
DEL button while turning ON the controller.
2)
All LEDs will blink.
3.5 Scene Programming (Steps)
3.5.1 INSERT A SCENE
1)
Press and hold the PROGRAM button to enter programming mode.
2)
Press the desired CHASE button.
3)
Press the TAPSYNC DISPLAY to switch the LED display to steps view.
4)
Use the BANK UP/DOWN buttons to navigate steps and locate the insert point of
the new scene. The display will read the step number.
5)
Press MIDI/ADD button to prepare the insert.
6)
Use the BANK UP/DOWN button to locate the SCENE.
7)
Press the SCENE button that corresponds to the scene to be inserted.
8)
Press MIDI/ADD button to insert the scene. All LEDs will blink.
3.5.2 COPY A SCENE
1)
Press and hold the PROGRAM button to enter programming mode.
2)
Select the BANK that contains the scene to be copied using the BANK UP/DOWN
buttons.
Press the SCENE button that corresponds to the scene to be copied.
3)
4)
Press MIDI/ADD button to copy the scene.
5)
Select the destination BANK that contains the scene memory to record onto
using the BANK UP/DOWN buttons.
6)
Press the desired SCENE button to complete copy. All LEDs will blink.
3.5.3 DELETE A SCENE
1) Press and hold the PROGRAM button to enter programming mode.
2) Select the BANK that contains the scene to be deleted by using the BANK
UP/DOWN buttons.
3) Press and hold the AUTO DEL button.
4) Press the SCENE button that corresponds to the scene you want to delete. All LEDs
will blink.
©Copyright Lotronic 2014
Manual LC192DMX
11