Ibiza sound LC192DMX Manual Del Usuario página 6

3.1.2 Fixture Addressing
The Controller is programmed to control 16 channels of DMX per fixture. Therefore
the fixtures you wish to control with the corresponding SCANNER buttons on the unit,
must be spaced 16 channels apart.
Use the table below for DMX address allocation
Fixture or scanner #
1
2
3
4
5
6
7
8
9
10
11
12
Please refer to your individual fixture's manual for DMX addressing instructions. The
table above refers to a standard 9 dipswitch binary configurable device.
3.1.3 PAN & TILT CHANNEL ASSIGN
Because not all intelligent lighting fixtures are alike or share the same control
attributes, the Controller allows the user to assign the same pan and tilt channel to
every individual fixture.
1) Press and hold PROGRAM (5) &TAPSYNC (11) to access Assignment mode
2) Press a SCANNER button that represents the fixture whose faders you would like to
re-assign.
3) Move one fader of 1-8 channel to select the pan channel. Press page button to
toggle between pages)
4) Press the TAPSYNC DISPLAY button to select pan / tilt
5) Move one fader of 1-8 channel to select the tilt channel (press page button to
toggle between pages)
6) Press and hold PROGRAM & TAPSYNC DISPLAY buttons to exit and save setting.
All LEDs will blink.
Note: All pan/tilt can be reassigned to output on a different DMX channel.
Press AUTO/DEL buttons to delete the channel assignment mode.
©Copyright Lotronic 2014
Default DMX
starting address
1
17
33
49
65
81
97
113
129
145
161
177
Manual LC192DMX
Setting of the binary
DIP switches
1 "On"
1 & 5 "On"
1 & 6 "On"
1, 5 & 6 "On"
1 & 7 "On"
1, 5 & 7 "On"
1, 6 & 7 "On"
1, 5, 6 & 7 "On"
1 & 8 "On"
1, 5 & 8 "On"
1, 6 & 8 "On"
1, 5, 6 & 8 "On"
6