Entering Program Mode; Running A Program - Ibiza sound LC192DMX Manual Del Usuario

3) Move faders to change fixture attributes.
CHASE Review
1) Press any one of the 6 CHASE buttons.
2) Press the TAP DISPLAY button to view the step number on the display.
3) Press the BANK UP/DOWN buttons review all scenes in the chase.
Notes : Make sure you are still in MANUAL Mode
3.3 Programming
A program (bank) is a sequence of different scenes (or steps) that will be called up
one after another. In the controller 23 programs can be created of 8 scenes in each.

3.3.1 Entering program mode

Press the Program button until the LED blinks
3.3.2 CREATE A SCENE
A scene is a static lighting state. Scenes are stored in banks. There are 23 bank
memories on the controller and each bank can hold 8 scene memories. The controller
can save 184 scenes total.
1) Press the PROGRAM button until the LED blinks.
2) You can position FADE and SPEED to any place you need to achieve the effect you
want to create.
3) Select the SCANNERS you wish to include in your scene.
4) Compose a look by moving the sliders.
5) Tap MIDI/ADD button.
6) Choose a BANK (01~23) to change if necessary.
7) Select a SCENES button to store.
8) Repeat steps 3 through 7 as necessary. 8 scenes can be recorded in a Program
All LEDs will flash to confirm. The LED display will now indicate the Scene number and
Bank number used.

3.3.3 RUNNING A PROGRAM

1) Use BANK UP/DOWN buttons to change Program banks if necessary.
2) Press the AUTO DEL button repeatedly until the AUTO LED turns on.
3) Adjust the PROGRAM speed via the SPEED fader and the loop rate via the FADE
TIME fader.
4) Alternatively you can tap the TAPSYNC DISPLAY button twice. The time between
two taps sets the time between SCENES (up to 10 minutes).
3.3.4 CHECK PROGRAM
1) Press and hold the PROGRAM button until the LED blinks.
2) Use the BANK UP/DOWN buttons to select the PROGRAM bank to review.
3) Press the SCENES buttons to review each scene individually.
©Copyright Lotronic 2014 Manual LC192DMX 8