Schlüter ® -Bekotec-Therm-Rtb; Structure; Dimensions; Functional Description - Schluter Systems BEKOTEC-THERM-RTBR Instrucciones De Montaje

Schlüter -BEKOTEC-THERM-RTB
®
3.2 Schlüter
®

3.2.1 Structure

¸
µ
Fig. 7: Structure of BEKOTEC-THERM-RTB

3.2.2 Dimensions

135
Fig. 8: Dimensions in mm
-BEKOTEC-THERM-RTB
57
1
Installation box
2
Thermostat valve RTB
4
Flushing and venting valve
6
Cover plate with integrated dial (operating unit)
7
Dial

Valve connector G ¾ AG (Euro cone acc. to DIN EN 16313)

Thermostat RTB (sensor unit)

3.2.3 Functional description

BEKOTEC-THERM-RTB is used for limiting the return temperature in a
surface heating system. Select the installation position of BEKOTEC-
THERM-RTB in such a way that the heating water first flows through the
heating circuit and then through the BEKOTEC-THERM-RTB valve.
The heating medium cools down on its way from the heated area to
BEKOTEC-THERM-RTB. The media temperature is regulated by adjusting
the flow volume. The return temperature is set at the thermostat dial.
The temperature of the surface heating system can be adjusted with the
dial.
BEKOTEC-THERM-RTB is usually operated in a room with an
additional radiator.
The floor temperature covers the basic heat requirements,
while the radiator regulates the room temperature.
i
GB
25