Start-Up / Operation; Cover Plate Incl. Thermostat With Remote Adjustment - Rtbr - Schluter Systems BEKOTEC-THERM-RTBR Instrucciones De Montaje

Start-up / operation

Setting the room temperature at the RTBR valve
Temperature settings at the RTBR thermostat head
RTBR
0
❄
1
2
3
4
5

6.3 Cover plate incl. thermostat with remote adjustment - RTBR

1. Once the construction work is complete, remove the protective cover.
2. Remove the protective cap.
3. Screw the set piston (see Fig.1 on page 22) onto the valve. Guide the capillary pipe downwards.
4. Set the valve insulation (see Fig. 1 on page 22) in place.
5. Attach the cover plate.
Fig. 20: Attaching the cover plate with dial
Room temperature
(Valve completely closed)
7 °C (frost protection setting)
12 °C
16 °C
20 °C
24 °C
28 °C
Fig. 19
Don't bend the capillary pipe.
As an installation aid, the cover plate can be
attached to the venting valve with plastic tape.
GB
i
31