How To Delete Memory Contents And Quit Setting Mode - IBP TD 4222 Manual De Instrucciones

12 device settings
In order to delete the memory contents, you will have to carry out the steps for setting time, date,
measurement unit and temperature unit first. After you have confirmed the temperature unit, "dEL" and
"mem" appear in the display.

how to delete memory contents and quit setting mode

1. Deleting memory contents:
The display shows "dEL" and "mem" (flashing) (Fig. 29). You can now
delete the entire memory contents by pressing the Menu button
once. The display now shows "—--" (Fig. 30) and then "OK", to
show you that the memory contents have been deleted.
2. Quitting setting mode:
When you have completed the settings, press the Setting button
(SET) to quit setting mode and to switch the device off.
Notes: - If you can see "dEL" in the display, and "mem" is flashing but
you do not want to delete the memory contents, on no ac-
count press the menu button. In this case, just press the
Setting button (SET) to turn the device off.
- When you are in setting mode, and no button at all is pressed
over a period of one minute, the device will switch itself off
automatically.
26
( Fig. 29)
( Fig. 30)