Gas Connection - M-system DOMINO Instrucciones De Uso

5
5
NL
ES
FR
BE

GAS CONNECTION

Connection to the gas main must be per-
formed by a qualified technician, in com-
pliance with the current laws in force.
The cooktop is set up and calibrated to
work with the gas indicated on the rating
plate affixed to the appliance and on this
instruction booklet.
The gas supply system must conform
to the local regulations in force.
To conned the cooktop to the gas mains
or cylinder use a flexible stainless steel
hose with continuous wall conforming to
local regulations. Use gasket F for the
cylindrical elbow connection.
The flexible metal tubes must be at most
2 m long.
Attention: If a flexible stainless steel
hose is used, it must be so installed
that it cannot come into contact with a
movable part of the unit and is not
obstructed and so that its whole
length can be inspected.
The cooktop connection is made up as
follows:
1 nut "A"
union elbow "C":
- cylindrical - for Spain and France
- conical - for Holland
gaskets "F"
conical adapter "G" for Belgium only
106
GAS SECTION
II
Cat: 2L 3B/P
II
Cat: 2H3+
II
Cat: 2E+3+
C F A
1/2" G
conical
C F A
1/2" G - cylindrical
F
C F A
1/2" G - cylindrical
F
G
1/2" G
conical
NL
Fig. 5.1a
ES
FR
Fig. 5.1b
BE
Fig. 5.1c