LIGHTING GAS BURNERS
Models without electric ignition
To light one of the gas burners, hold a
flame (e.g. a match) close to the top part
of the burner, push in and turn the rela-
tive knob (fig. 2.1b) in an anti-clockwise
direction (fig. 2.3b), pointing the knob
indicator towards the large flame symbol
(i.e. max. gas flow).
Models fitted with electric spark
lighter button
On these cooker tops, to light one of the
burners you have to push in and turn the
relative knob (figs. 2.1b - 2.3b) to the
maximum aperture position (large flame
symbol
) and press the electric lighter
button (fig. 2.2) until the flame has been
lit.
Adjust the gas valve to the desired posi-
tion.
Models fitted with electric lighter
incorporated into the burner
knobs
The electric ignition is incorporated in the
knobs (
symbol beside the
- max. heat/max. gas flow) (fig. 2.1a).
To light one of the gas burners, push in
and turn the relative knob to the maxi-
mum aperture position (large flame sym-
bol
) and hold the knob in until the
flame has been lit.
The sparks produced by the lighter situ-
ated inside the relative burner will light
the flame.
In case of black-out, bring a lighted
match close to the burner.
In the event that the local gas supply
conditions makes it difficult to light the
burner in maximum aperture position, try
again with the knob in minimum position.
96
Fig. 2.2
Fig. 2.3a
symbol
Fig. 2.3b