Using The Size On-Screen Display; Using The Geom (Geometry) On-Screen Display - Sun 21-Inch Premium Manual De Instrucciones

Customizing Your Monitor

Using the SIZE On-screen Display

The SIZE settings allow you to adjust the size of the picture.
Once the setting is adjusted, it will be stored in memory for
the current input signal.
1
Press the button.
The MENU OSD appears.
2
Press the ¨./> and >?// buttons to select "
SIZE," and press the
The SIZE OSD appears.
3
For horizontal adjustment
Press the >?// buttons.
/ . . . to increase picture size
? . . . to decrease picture size
For vertical adjustment
Press the ¨./> buttons.
> . . . to increase picture size
. . . . to decrease picture size
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the
To reset, press the (reset) button while the OSD is on.
The horizontal and vertical sizes are both reset to the factory
settings.
10
button again.
SIZE
73
26
button again.
Using the GEOM (Geometry) On-
screen Display
The GEOM (geometry) settings allow you to adjust the
shape and orientation of the picture.
Once the rotation is adjusted, it will be stored in memory for
all input signals received. All other adjustments will be
stored in memory for the current input signal.
1
Press the button.
The MENU OSD appears.
2
Press the ¨./> and >?// buttons to select "
GEOM," and press the
The GEOMETRY OSD appears.
3
Press the ¨./> buttons to select the item you want
to adjust.
Select To
ROTATION adjust the picture rotation
PINCUSHION adjust the picture sides
PIN BALANCE adjust the picture side balance
KEYSTONE adjust the picture width at the top
KEY BALANCE adjust the picture shape balance
button again.
GEOMETRY
26
ROTATION