Troubleshooting - Espressione CA4865 Manual De Instrucciones

20 TROUBLESHOOTING

PROBLEM
The coffee-maker does not come on.
The first coffee is of poor quality.
When I turn the machine on, a little dirty
water comes out.
When I turn the machine off, a little dirty
water comes out.
The coffee is not hot enough.
When coffee made with ground coffee
is selected, the coffee-maker pours out
only water.
You have used ground coffee and no
coffee is made.
CAUSE
The coffee-maker is not connected to
the mains.
The first time the grinder is started, it
does not pour sufficient quantity into
the brewing unit.
The coffee-maker automatically cleans
the pipes to make sure the coffee is of
optimum quality, free from the remains
of previous coffees.
Before turning off and to prevent the cof-
fee outlet from being blocked with cof-
fee remains, the coffee-maker expels a
little water and cleans the coffee outlet.
The cups are cold.
You have not put the ground coffee in
the coffee dispenser.
You have put too much coffee in the
dispenser.
You have not pressed the
button and the coffee be-
an compartment is empty.
You have put the ground coffee in the
dispenser when the coffee-maker was
switched off.
27
SOLUTION
Press the switch, position 'I' (on).
Check the cable and the plug.
If it still does not come on, take the cof-
fee-maker to an authorised technical
service centre.
Throw the coffee away. The other cof-
fees will always be of good quality.
Do not put the cup in position until the
coffee-maker has performed the auto-
cleaning process.
No solution is required; this function
has been designed to prevent you from
having to clean it manually.
Preheat the cups.
Add ground coffee using the dispen-
sing spoon (maximum one flat spoon-
ful) and select the coffee again.
Clean the ground coffee from the dis-
penser. Repeat the operation using the
dispensing spoon and use a maximum
of one flat spoonful.
Press the button again.
Clean the ground coffee from the dispens-
er. Repeat the operation, first
of all pressing the button.