Starting The Dishwasher - Proline DWP 1247 WH Manual De Instrucciones

Starting the Dishwasher
1. Turn the water tap on.
2. Open the dishwasher door.
3. Check the filters.
Ensure they are clean and properly positioned. See "Cleaning and maintenance"
section.
4. Check that there is rinse aid and salt.
5. Load the dishes.
Ensure that the spray arms can rotate freely.
6. Add the required amount of detergent into the dispenser according to the "Washing
Programmes" chart.
7. Close the dishwasher door securely.
8. Press to switch on the dishwasher.
• The power and ECO programme indicator lights will illuminate.
9. Select the desired washing programme by repeatedly pressing
• The corresponding washing programme indicator light will illuminate.
• Delay timer: The delay timer allows you to delay the start of a washing programme
by 3 hours, 6 hours or 9 hours.
Repeatedly press
Once the delay timer has been set, press
corresponding start delay time indicator light will flash.
10. If you want to activate extra drying function, press
indicator light will illuminate.
• This function can only be used with Intensive, Normal and ECO programmes.
• When this function is activated, the dishwasher will increase temperature at the end
of a washing programme to improve drying.
11. If you want to perform a half load wash, press
light will illuminate.
This function can only be used in Intensive, Normal, Eco, Glass and 90 minutes
programmes.
When this function is activated, the dishwasher will automatically reduce the water
and energy consumption and the washing time.
until the desired start delay indicator light illuminates.
to activate the function. The
and the corresponding
and the corresponding indicator
.
17