Installing The Optional Cabinet - Stryker 6254 Manual De Uso

English

INSTALLING THE OPTIONAL CABINET

To install the optional cabinet:
1 . Use the bracket as a template to mark the location of the mounting holes at the area where the cabinet will be
installed . Consider the dimensions of the cabinet when selecting and marking the location . The approximate
height of the bottom of the cabinet to the floor should be at least 12 inches .
2 . Using fasteners (not supplied) appropriate for the wall type, install the cabinet by using at least four of the
mounting holes .
3 . Hang the chair from the bracket using the upper control handle .
Return To Table of Contents
1-26
Operation Guide
Figure 37 - Cabinet Dimensions
Figure 38 - Chair stored in the cabinet
6254-009-005 REV B www.stryker.com