Sony KL-X9200J Manual De Instrucciones página 17

Ocultar thumbs Ver también para KL-X9200J:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

The CENTER adjustment screen automatically
disappears after about 80 seconds if you do not press
any button. You can also erase the CENTER adjustment
screen by pressing MENU.
To reset to the factory preset setting
Press RESET on the monitor while the CENTER
adjustment screen is displayed. For details, see page 26.
Notes
• You cannot use this function for the input from VIDEO 1/2/3
IN and COMPONENT IN.
• You can operate the menu using the √/◊/ı/∫ and the ENTER
buttons inside the drop-down panel on the front of the
monitor.
Adjusting the picture size (SIZE)
MENU
After projecting the picture from a computer, you may
need to adjust the picture size to fit the monitor screen.
The setting is only for the input signal displayed on the
screen.
1
Press MENU.
MENU
2
Press v or V to select "
ENTER.
ENTER
(SIZE)," and press
S I Z E
ENTER
EX I T
3
Press B or b to adjust the picture size.
b: to increase horizontal size
B: to decrease horizontal size
The SIZE adjustment screen automatically disappears
after about 80 seconds if you do not press any button.
You can also erase the SIZE adjustment screen by
pressing MENU again.
To reset to the factory preset setting
Press RESET on the monitor while the SIZE adjustment
screen is displayed. For details, see page 26.
Notes
• If a signal with resolution of 640 × 350, 640 × 400 or 720 × 400,
or Wide Resolution signal is input, the picture will be enlarged
to fill the screen but will appear lengthened vertically.
• You cannot use this function for the input from VIDEO 1/2/3
IN and COMPONENT IN.
• You can operate the menu using the √/◊/ı/∫ and the ENTER
buttons inside the drop-down panel on the front of the
monitor.
GB
17
-GB
Operations

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kl-x9200mKl-x9200u

Tabla de contenido