Control Panel - Salva DANUBIO F-700 Instrucciones De Usuario

4.1.

Control panel

Usuario_FormadoraDAN_F700_(c-f-i)_020511
This comprises:
•
Machine startup button.
•
Machine shutdown button.
In order to start up the machine:
Ensure the machine pole base and the pole base for the line
connected to the power grid are secure. The cover lug should
fi t in the housing of the other base.
Check the pre-roller input belt is clean. If this surface is free of
fl our, lumps, powder, etc, start production. If it is not, remove
them using a soft brush.
To start up, simply press the green start-up button.
Piece production rate adjustment:
We only have one operation mode as an individual machine.
When it is located in a bread plant train, operation is determi-
ned by the pre-fermentation chamber.
Adjust the required shape, carrying out the corresponding esti-
mates. This is done by turning the upper wheels.
Clockwise turn:
Anti-clockwise turn:
Press the red shutdown button to stop machine operation.
-30-
Longer loaf.
Thicker loaf. Marks the separation
between the doughs between 0
and 30 mm.