Salva DANUBIO F-700 Instrucciones De Usuario página 31

5. 5. Failures and possible solution Failures and possible solution
Usuario_FormadoraDAN_F700_(c-f-i)_020511
IMPORTANT : All work involving repairs must be carried out
by the Offi cial Technical Service of SALVA INDUSTRIAL,
S.A. or by personnel authorised by it. If the indicated ac-
tions do not solve the problem, or should there be other
failures, inform the Offi cial Technical Service of SALVA IN-
DUSTRIAL, S. A.
•
The machine does not start up.
Check that the STOP button is in raised position,
as down position means the electrical system is
blocked by this safety system.
•
The shaper does not roll out the dough co-
rrectly.
Check the state of the roller belts (deterioration,
tautness, clean).
-31-