Stihl MSA 160 C Manual De Instrucciones página 56

English
shoes, safety helmets or ear
protectors, appropriate to the type
of electrical power tool used and
work undertaken, reduces the risk
of injury.
c) Avoid unintentional operation of
the device. Check that the
electrical power tool is switched
off before you connect it to the
mains, pick it up or carry it.
Accidents can happen if you carry
the device with your finger on the
ON / OFF switch or with the device
switched on.
d) Remove any setting tools or
spanners before you switch the
device on. A tool or spanner left
attached to a rotating part of a
device can lead to injury.
e) Avoid placing your body in an
unnatural position. Keep proper
footing and balance at all times.
By doing this you will be in a better
position to control the device in
unforeseen circumstances.
f) Wear suitable clothing. Do not
wear loose clothing or jewelry.
Keep your hair, clothing and
gloves clear of moving parts.
Loose clothing, jewelry or long hair
can become trapped in moving
parts.
g) If vacuum dust extraction and
collection devices are fitted do
not forget to check that they are
properly connected and correctly
used. The use of these devices
reduces the hazard presented by
dust.
54
4) Careful handling and use of
electrical power tools
a) Do not overload the device.
Always use an electrical power
tool that is intended for the task
you are undertaking. By using the
right electrical power tool for the job
you will work more safely and
achieve a better result.
b) Do not use an electrical power
tool if its switch is defective. An
electrical power tool that can no
longer be switched on and off is
dangerous and must be repaired.
c) Pull the mains plug from the
socket before you make any
adjustments to the device,
change accessories or when the
device is put away. This
precaution is intended to prevent
you from unintentionally starting the
device.
d) When not in use always ensure
that electrical power tools are
kept out of reach of children. Do
not let anyone use the device if
he or she is not familiar with it or
has not read the instructions and
advice. Electrical power tools are
dangerous when they are used by
inexperienced people.
e) Look after the device carefully.
Check that moving parts are
working properly and move
freely. Check for any parts that
are broken or damaged enough
to detrimentally affect the
functioning of the device. Have
damaged parts repaired before
you use the device. Many
accidents have their origins in
poorly maintained electrical power
tools.
f) Keep cutting tools clean and
sharp. Carefully maintained cutting
tools with sharp cutting edges are
less likely to jam and are easier to
control.
g) Use the electrical power tool,
accessories, tool bits etc. in
accordance with these
instructions, taking into account
the working conditions and the
work to be performed. The use of
electrical power tools for purposes
other than those intended can lead
to dangerous situations.
5) Battery tool use and care
a) Recharge the batteries only in
chargers specified by the
manufacturer. A charger that is
suitable for one type of battery pack
may create a risk of fire when used
with another battery pack.
b) Use power tools only with
specifically designated battery
packs. Use of any other battery
packs may create a risk of injury and
fire.
MSA 160 C