Publicidad
Idiomas disponibles
Idiomas disponibles
9
11
II
Note
14
When mounting the basic carrier bars on C-Class (model
series W 204), E-Class (model series W 212), and the
E-Class Coupe (model series C 207), equipped with the
optional sliding/pop-up roof (Code 413), make sure that the
covers (see arrow) are in between the protective
enclosure (14) and the mounts (15).
12
4
10
15
M+P-03F-6650
1
12
4
7
9
2.
Place the basic carrier bar (1) as illustrated, on the
front left mounting point on the roof of the vehicle (7), so
that the screws (9) are positioned directly over the
mounting points (10). If necessary, using the tool (4), loosen
the screws (12) on both sides and position the basic carrier
bar (1) so that the screws (9) can be tightened by hand.
3.
Lift the lever (11) and tighten the screws (9) by hand.
Important
The lever (11) is used to tighten the screws (9) and
prevents them from loosening by themselves.
4.
Tighten the screws (9) using the lever (11). Then put
the lever (11) back in place in such a way (e.g. in position
I and II), that the cover caps can be put back on.
5.
Tighten the screws (12) with the tool (4).
- 35 -
I
11
10
M+P-03F-7325
Publicidad
