Carrera RC Super Mario-Flying Cape Mario Instrucciones De Montaje página 4

future reference. Keep the instructions for use for later reference. Note for adult supervisors: Check if
the toy is assembled as instructed. The assembly shall be performed under the supervision of an adult.
WARNING! Not suitable for children under 8 years old!
This product is not intended for use by children without supervision of a parent. Flying the helicopter requires
skill and children must be trained under the direct supervision of an adult. Before first use: Read the user's
information together with your child. Inappropriate use may result in severe injuries and/or damage to
property. It has to be operated with care and caution and requires both mechanical and mental skills. The
operating instructions contain notes on safety and technical regulations as well as information on maintaining
and operating the product. It is indispensable to read these instructions thoroughly before the first usage. Only
this helps to avoid accidents with injuries and damage.
For safe use, the room where the toy is used must be sufficiently large. Only use the helicopter in
closed rooms which provide sufficient space and follow all instructions given in this manual.
Hands, hair and loose clothing, including other objects such as pens and screwdrivers must be kept away
from the propeller (rotor). Do not touch the rotating rotor. Especially take care that your hands DO NOT get
close to the rotor blades!
CAUTION: Risk of eye injuries. Do not fly near your face to avoid injuries. As user of this product you
are solely responsible for handling it safely in order to ensure that neither you nor other persons or
their property suffer damages or are endangered.
• Never use your model with weak remote control batteries.
• This toy is only designed to be used in a home environment.
• CAUTION: Do not start up and fly when persons, a nimals or any obstructions are within the flying
range of the helicopter.
• Exactly observe the instructions and warnings for this product and for any possible additional equipment
(battery charger, rechargeable batteries etc.) being used by you.
• Should the helicopter come into contact with any living thing or solid object, immediately return the
gas control to zero, in other words the left-hand joystick must be at the stop at the bottom of the slide!
• Avoid any moisture as this might do damage to the electronics.
• Do not change or modify anything on the helicopter.
If you do not agree to these terms please immediately return the complete helicopter model in new and
unused condition to the retailer.
Important information concerning Lithium Polymer rechargeable batteries
Lithium-Polymer (LiPo) rechargeable batteries are significantly more sensitive than traditional alkali- or
NiMH-rechargeable batteries which are normally used with radio control units. Therefore the instructions
and warnings have to be observed in detail. In case of improper use of LiPo rechargeable batteries there is
a danger of fire. Always follow the manufacturers´ instructions if you dispose of LiPo rechargeable batteries.
Regulations on disposal for waste electrical and electronic equipment (WEEE)
This symbol, showing refuse bins with a cross through them, denotes that empty
batteries, rechargeable batteries, button cells, recharge able battery packs, equipment
batteries, disused electrical equipment, etc. should not be disposed of in domestic
refuse, as they are harmful to the environment and health. Please help to preserve
environment and health and talk to your children about the correct disposal of used
batteries and disused electrical equipment. Batteries and disused electrical equipment should be handed in to
the usual collection points where they can be properly recycled. Do not mix dissimilar battery types or employ
new and used batteries together. Empty batteries should be removed from the product. Do not recharge non-
recharge able batteries due to risk of explosion. Batteries are to be inserted with the correct polarity.
WARNING! Rechargeable batteries are only to be charged by adults.
while it is charging.
Exhausted batteries are to be removed from the toy. Rechargeable batteries should be
removed from the product before charging. Supply terminal are not to be short-circuited. Only use the batteries
recommended or equivalent types. This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children
without supervision. WARNING: For the purposes of recharging the battery, only use the detachable supply
unit provided with this toy.
Battery chargers used with the toy are to be regularly examined for damage to the
cord, plug, enclosure and other parts, and in the event of such damage, they must not be used until the damage
has been repaired. The toy is only to be connected to Class II equipment bearing the following symbol.
FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the us-
er's authority to operate the equipment.
NOTE: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If the product does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures :
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IC statement
The device contain license-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Eco-
nomic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
1. The device must not cause interference;
2. The device must accept any interference, including interference that may cause undesired operation of the device.
Guidelines and warnings for the use of LiPo rechargeable batteries
• You have to charge the attached 3.7 V
and at a safe distance to flammable material.
• Never leave the battery unattended while it is charging
• After a flight, the rechargeable battery has to cool down to the ambient air temperature before charging it.
• You must always use the corresponding LiPo charging unit (USB cable / remote control). In case of
non-compliance with these directions there is a danger of fire resulting in a health risk and/or damage to
property. NEVER use any other battery charger.
• Should the rechargeable battery swell or deform while discharging or recharging, you have to immediately
stop charging or discharging the battery. Take the battery out as quickly and carefully as possible and place
it in a safe and open area offside any inflammable material and watch it for at least 15 minutes. In case you
continue charging or discharging a battery which has already started to swell or deform there is a danger of
fire! Even in case of slight deforming or ballooning the rechargeable battery has to be taken out of operation.
ENGLISH
Never leave the battery unattended
180 mAh / 0.66Wh LiPo rechargeable battery in a safe place
• Store the rechargeable battery at ambient temperature in a dry place.
• Always recharge the battery immediately after use to prevent its becoming deep discharged. Please
make sure to allow a pause of about 20 minutes between finishing the flight and recharging the
battery. Recharge the battery occasionally (suggested every 2-3 months). Failure to treat the battery
as described above can lead to its becoming defective.
• When transporting or temporarily storing the rechargeable battery the temperature should be between
5-50°C. If possible, do not store the battery or the model in a car and do not expose it to direct sunlight. In
case the battery is broiled it can be damaged or catch fire.
Note: If the battery voltage/output is low you will recognise that a considerable trim and/or controlling is
necessary to avoid that the helicopter starts trundling. This usually occurs before reaching a battery voltage
of 3 V and it is a good moment to end the flight.
Contents of package
1x Helicopter
1
1x Controller
1x Display- & charging socket
1x USB charging cable
2x 1.5 V Micro AAA batteries (non-rechargeable)
Recharging the LiPo rechargeable battery
Make sure you only charge the LiPo rechargeable battery supplied with the LiPo charging unit also supplied
(USB cable and remote control). In case you try to charge the rechargeable battery with a different LiPo
battery charger or any other battery charger, this might cause serious damages. Please carefully read the
previous chapter about warnings and guidelines on the usage of rechargeable batteries before proceeding.
Charging via computer:
2
• Connect the USB charging cable with the USB port of a computer. The LED on the USB charger cable lights
green indicating that the charger unit is correctly connected to the computer. If you plug in a helicopter with
a discharged battery, the LED on the USB charging cable does not light up; this shows that the helicopter
battery is being charged. The USB charging cable and the charging socket on the helicopter are designed
to make incorrect connection impossible.
• It takes about 30 minutes to recharge a discharged battery (but NOT a deep-discharged one). When the
battery is fully charged, the LED display on the USB charger cable lights up green again.
Note: When supplied, the lipo-battery is already partially charged so the first charging cycle may well take less time.
It is essential to follow the connection sequence given above! If you have the charger cable only
connected to the helicopter, and not to a source of electricity, a green LED display indicates that there
is still power in the battery. The green LED display does not necessarily indicate the battery is still
adequately charged. While charging, the power switch must be in the "OFF" position.
Inserting the batteries in the remote control
Open the battery compartment with a screwdriver and insert the batteries in the remote control. Please
3
keep in mind the correct polarity. After having closed the compartment you can check all functions of the
remote control with the help of the power-switch on the front. With the power-switch turned ON and proper
functioning, the top center LED on the remote control will light up red. When the control LED flashes rapidly,
the batteries in the controller must be changed.
Frequency bind between model and remote control
The Carrera RC helicopter and the remote control are frequency bound at purchase. Should there occur
4
any problems with the communication between the Carrera RC helicopter and the remote control at the
beginning, please carry out a new frequency bind.
• Remove the model from its presentation plinth.
• Switch on the model at the ON/OFF switch.
• The LED in the helicopter now flashes in rhythmically-accelerating sequence.
• Switch on the controller at the ON/OFF switch. Slide the left joystick, i.e. the gas lever, completely to the
top and back down again into the zero position. The bond will take place automatically. While connecting,
the controller emits a signal tone.
• Hold the model so that the rotor blades are horizontal.
• Allow the helicopter a few moments until the system is correctly initialised and is ready for operation.
• The control LED now lights continuously once again, indicating that the connection is ended.
Checklist for flight preparation
This checklist does not replace the contents of the operating instructions. Although it can be used as a quick-
start-guide we strongly advise to first read the operating instructions in detail before you proceed.
• Check the contents of the package
• Connect the charging unit to the source of power.
• Charge the lipo-battery as described in the section "Charging the lipo-battery".
• Fit two AAA batteries in the controller, making sure their polarity is correct.
• Look for a suitable environment for flying
4
• Proceed as described in .
• Repeat the above points as required, if you wish to fly more helicopters at the same time.
• Check the control system
• Start the helicopter from one hand. At the same time, hold the controller in the other hand so that you can
take over control of the helicopter immediately.
WARNING! THE MODEL FLIES FORWARDS BY ITSELF AND CAN ONLY BE CONTROLLED IN HEIGHT
AND DIRECTION
• Make yourself familiar with the control system
• Trim the helicopter as necessary as described under "Controlling the helicopter".
• The helicopter is now ready to be flown.
• If the helicopter displays no functions, retry the above binding procedure.
• Fly the model
• Land the model
• Switch the model off at the ON/OFF switch (3 sec.).
• Always switch off the remote control last
Range of functions of the remote control
1. Antenna
5
2. Power switch (ON / OFF)
3. Control LED
4. Gas · tail (spinning in circles)
5. Tail (spinning in circles)
6. Trimmer for tail
7. Battery compartment
3
4