Configure Ip Address; Force Relay States (If Available) - Gorgy Timing RADIO TIMING CP09 Guia Del Usuario

► Example: For France, the fields with take the value "+1" and "Europe" (which is UTC time
+ 1 with European DST change).
It is highly important to configure the time zone and daylight saving
time (DST) change fields correctly. If these fields are not set cor-
rectly, there will be errors in the time outputs, or the relay switching
times will be shifted.
When you confirm this page, the
its internal clock and therefore ignores any external synchronisa-
tion source. To reactivate the synchronisation source, see Section
4.6 TIME INPUTS / OUTPUTS.

3.5. CONFIGURE IP ADDRESS

This screen allows you to modify the
RTCP09's IP address as well as the subnet
mask and the gateway address, if any.
The first field on the top left is the IP address
assignment mode:
► "A" for Automatic: the address is assigned by a DHCP server.
► "M" for Manual: the address used is the one specified by the user on the screen.
Press "OK" to confirm the settings and restart the RTCP09.

3.6. FORCE RELAY STATES (IF AVAILABLE)

If the RTCP09 is equipped with relay outputs, you can use this screen to force their state,
ignoring the calendar data.
Each relay is associated with an operatingmode represented by a letter:
► "A": automatic mode, the corresponding
relay switches depending on the calen-
dar data.
► "1": forced mode, the corresponding relay
makes the contact and maintains it closed.
► "0": forced mode, the corresponding relay
releases the contact and maintains it open.
MDE-RTCP09-3060V2.2
RTCP09 switches automatically to
89