Alarm On The Lcd Screen - Gorgy Timing RADIO TIMING CP09 Guia Del Usuario

3.9. ALARM ON THE LCD SCREEN

The RTCP09 can indicate several alarms:
► MAINTENANCE
► CATCHING UP PULSES
► WAITING FOR PULSES
► ERROR: PULSE SC
► ERROR: PULSE OC
► Maintenance :
For the procedure to follow, please contact our technical department (contact details on
the back of this document).
Catching up pulses:
►
As the pulse receiving clocks are running late, the
clocks are set to the exact time.
► Waiting for pulses:
As the pulse receiving clocks are running fast, the
set to the exact time before sending a new pulse.
► Error: Pulse SC:
This alarm indicates that the pulse line is short-circuited.
Check the state of the pulse line before restarting the pulses via the LCD screen (see
Section 3.7. PULSE OUTPUT) or via the Web interface (see Section 4.6. TIME INPUTS
/ OUTPUTS paragraph 4.6.2 Detailed description of time outputs).
► Error: Pulse OC:
This alarm indicates that the pulse line is in open circuit.
Check the state of the pulse line before restarting the pulses via the LCD screen (see
Section 3.7 PULSE OUTPUT) or via the Web interface (see Section 4.6 TIME INPUTS
/ OUTPUTS paragraph 4.6.2 Detailed description of time outputs).
.
MDE-RTCP09-3060V2.2
RTCP09 sends pulses until the
RTCP09 will wait for the clocks to be
91