FITFIU FITNESS MC-260 Manual Usuario página 47

ASSEMBLY
ATTENTION: Do not connect the tape to a power source before completing the assembly.
NOTE: Open the box, remove the main frame and components and place it on the floor in an
open area.
STEP 1
Open the box and unpack the product. Place it on a flat surface.
STEP 2
Unfold the console at a horizontal angle as shown by mark A, until it locks in position B. Then insert 2 M8x15 screws
to lock the console.
Screws M8x15
Security key
B
47
ELECTRIC TREADMILL
A
MC-260
EN