Presetting Stations - JVC KW-V41BT Manual De Instrucciones

TUNER
❏ Tuning in FM stations only with strong
signals—Local seek
1
2
[ON] Select this to tune in only to stations
with sufficient signal strength. The LO
indicator lights up.
[OFF] Deactivate the function.
❏ Reducing interference during FM
reception
1
2
[Auto] Increases the tuner selectivity to
reduce interference between adjacent
stations. (Stereo effect may be lost.)
[Wide] Subject to interference from adjacent
stations, but sound quality will not be
degraded and the stereo effect will
remain.
22
❏ Changing the tuner channel interval
The tuner channel interval changes depending on
the area you use this unit.
1
2
[NA] Select this when using in North/
Central/South America. FM/AM
intervals are set to 200 kHz/10 kHz.
[EU] Select this when using in any other
areas. FM/AM intervals are set to 50
kHz/9 kHz.
[SA] Select this when using in South
American countries where FM
interval is 50 kHz. AM interval is set
to 10 kHz.
• The initial setting is [NA] for KW-V41BT Region
1/KW-V21BT Region 1/KW-V11 Region 1,
and [SA] for KW-V41BT Region 4/KW-V21BT
Region 4/KW-V11 Region 4.

Presetting stations

❏ Storing stations in the memory
You can preset 6 stations for each band.
Automatic p resetting — SSM (Strong-station
Sequential Memory) (For FM only)
(Hold)
Local stations with the strongest signals are found
and stored automatically.
Manual presetting
1
Tune in to a station you want to preset.
(Page 21)
2
Select a preset number.
(Hold)
The station selected in step 1 is stored.