Using The Bluetooth Audio Player - JVC KW-V41BT Manual De Instrucciones

BLUETOOTH
❏ Setting items
<Phone Shows the connected phone device
Device> name.
<Auto • ON: The unit answers the incoming
Response> calls automatically .
• OFF (Initial): The unit does not
answer the calls automatically.
Answer the calls manually.
<SMS • ON (Initial): The unit informs you of
Notify> the arrival of a message by ringing
and displaying "Receiving Message".
• OFF : The unit does not inform you
of the arrival of a message.
<Ring • System (Initial): The ring tone set on
Mode> the unit is used.
• Phone: The ring tone set on the
mobile phone is used. (This function
may not work depending on the
mobile phone.)
<Ring Tone When <Ring Mode> is set to
Change> <System>, press [Enter], then select
the ring tone for received calls and
SMS from <Tone1> (Initial), <Tone2>,
<Tone3>.
• Call Tone: Selects the ring tone for
phone calls.
• Message Tone: Selects the ring
tone for SMS.

Using the Bluetooth audio player

• To register a new device, see page 30.
• To connect/disconnect a device, see page 32.
❏ Indications and buttons on the source
control screen
1 2 3 4 5
6
• The operation buttons, indications and
information displayed on the screen differ
depending on the connected device.
Playback information
1 Playback mode
2 Track no.*
1
3 Playback status*
1
4 Playing time*
1
5 The signal strength and battery level (only when
the information is acquired from the device)
6 Tag data (current track title/artist name/album
title)* 1
• Pressing [H] scrolls the text if not all of the text
is shown.
Operation buttons
Selects Repeat playback mode.*
[ ]
Selects Random playback mode.*
[ ]
• Selects a track. (Press)
[S] [T]
• Reverse/forward search. (Hold)
Starts playback.
[I]
Pauses playback.
[W]
1
* Available only for devices compatible with AVRCP 1.3.
* 2
To cancel random and repeat mode, press the button repeatedly
until the indicator disappears.
1 2
*
1 2
*
ENGLISH 37