Gardigo Marder-Frei Autol Manual De Instrucciones página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 14
reduced physical, sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by children without
supervision.
• In case of repairs, only use original spare parts, to avoid serious damage.
• Check feed cables and conducting cables connected to the device for breaks or insu-
lation defects. If you find a defect, or there is visible damage do not use the device.
• Repairs or other works, e. g. changing a fuse, etc. may only be carried out by an appro-
priately trained, skilled person.
·• It must be noted that operator or connecting errors lie outside the influence of Gar-
digo and we cannot accept any liability for resulting damages.
• Always check whether the device is suitable for the respective place where you in-
tend using it.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
3. Assembly
The Marten-Free-Device is fastened by means of selftapping screws or binders in the
engine compartment on the carriage. The connecting cable to the car battery must be
passed in that manner that it doesn't get in contact with movable or hot parts (e. g.
ventilating wheel, exhaust manifold). The device should be placed in the engine com-
partment in that manner that the acoustic noise can constantly spread and is not ab-
sorbed by insulating mats.
Attention! The assembly should be carried out by authorised specialised
staff!
4. Electrical connection
The device is directly connected to the car battery. The black cable is connected to the
positive pole, the brown one to the negative pole. If additionally the grey cable is con-
nected to clamp 15 (ignition lock, car radio) of the car battery, the control automatically
switches on the device, when the ignition is turned off and automatically switches it
off, when the ignition is switched on. This increases the durability of the device, as it is
only put into operation with the motor turned off.
8

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

78405

Tabla de contenido