Instructions For The Solution Of Potential Failures - Simogas NOVA REC Manual De Instrucciones

9. INSTRUCTIONS FOR THE SOLUTION OF POTENTIAL FAILURES

EN
This manual tries to give solutions so that the user may repair "in situ" the small problems that may arise:
• The burners do not light:
Most likely there is lack of fuel in the circuit.
After checking, leave the main valve in the closed position. Proceed with the replacement of the cylinder.
• The burner flame gives off black gases and has a strong yellow color:
Most likely the Venturi nozzles are obstructed. Proceed to cleaning. If the problem persists call the technical service.
• When releasing the axial pressure of the control tap, after some 15 seconds the burner pilot light goes out:
The thermocouple is defective; require the services of authorized personnel.
The manufacturer is not responsible for any modification made to its original state. Incorrect use or bad usage inva-
lidates the manufacturing warranty. The manufacturer is not responsible for the plancha's functioning and quality if
AWARNING
they were caused by not following this INSTRUCTION MANUAL.
IN DOUBT PLEASE REFER TO THE SPANISH SOURCE TEXT.
34