dirna Bergstrom bycool blue line FLAT Instrucciones De Montaje página 29

FLAT
3
Attach the EPDM seal around the hatch gap
(see the details to cut the edges of the seal joint)
compliance measures indicated.
3a
Details of the positioning of the seal.
HOW TO CUT EPDM GASKET TO AVOID
!
WATER FILTRATION INTO THE CABIN
A- Glue gasket, keeping 100 mm of
protection paper at each side.
B- Remove the two pieces of paper.
C- Glue by pressing both ends.
B
Gasket
Only for standard cabins (L2H2)
Gasket
Remove
460 mm
minimum
40 mm
A
Gasket
100 mm Approx. (protection paper)
C
Gasket
29
EN
®
3a
15 mm
Gasket
Cabin roof
Gasket