dirna Bergstrom bycool blue line FLAT Instrucciones De Montaje página 37

FLAT
Only for Globetrotter XL cabins (L2H3)
4 CABIN EXTERIOR:
Position the Bycool in the hatch gap.
5 CABIN INTERIOR:
Thread 5 mm approximately (4) studs 8/125x100
or 120; the size will be chosen after positioning
the attachment supports and bearing in mind
that the studs must protrude by about 10 mm
from the bottom of them.
Bycool Basel
5
Stud
6
Position (1) Ø 7 rubber washer, (1) Ø 8 flat wide-
flanged washer, (2) M8 nut and (1) Ø 8 flat wide-
flanged washer, in each one of the front studs.
Sólo para cabinas Globettroter XL
Support
Hatch
6
37
5
5
EN
®
4
6