Publicidad
Idiomas disponibles
Idiomas disponibles
E
F
Lost combination or keys
IMPORTANT: Please read the following instructions
carefully. For your protection, combinations CANNOT
be issued by telephone request. To order replacement
keys and/or combinations, it is essential that you MAIL
the items listed in each category below to Sentry Group
with your order. If you need assistance in preparing
your order, or wish to purchase via credit card (Visa/
Mastercard only), please call Sentry Customer Service
toll-free Monday–Friday at 1-800-828-1438,
8:00am - 6:00pm E.S.T.
To purchase on-line, please visit
www.sentrysafe.com/CustomerService
Lost combination: First, find your safe's Model and Serial
Number. The Serial Number is in this packet, and is also printed
on the small label beside the door hinge (outside). Send a copy
of this, a notarized letter (last name must be different than that
of owner) stating you are the safe's owner, and a check or money
order for $12.00* (U.S. funds) to: Sentry Group, Dept. 200,
882 Linden Avenue, Rochester, NY 14625-2784 USA.
If using a credit card (Visa/Mastercard only), call 1-800-828-1438
and fax your Model and Serial number with the notarized letter
to 585-381-2940. Credit card information is not accepted
by fax, mail or e-mail.
Lost keys: To obtain replacement keys, find your safe's
Model and Serial Number. The Serial Number is in this packet,
and is also printed on the small label beside the door hinge
(outside).
Order by Mail: Send the Model and Serial number along
with check or money order (U.S. funds) for $12.00* to:
Sentry Group, Dept. 200, 882 Linden Avenue, Rochester,
NY 14625-2784 USA.
*
NOTE: Prices subject to change without prior notification.
IMPORTANT: For assistance in the event of lost keys
or combination, or for information on ordering extra
organizational features, please call us toll-free Monday-Friday
(8:00am - 6:00pm E.S.T. ) at 1-800-828-1438, or visit us on-line at
www.sentrysafe.com.
Order by Internet: Visit our website at
www.sentrysafe.com. Go to our Customer Service Section.
*
NOTE: Prices subject to change without prior notification.
Express Delivery is available for keys and/or combinations for
an additional charge. Visit our website for details at
www.sentrysafe.com/customer service
WARNING
DO NOT store delicate items directly in your safe.
SentrySafe products which offer fire protection have a patented
insulation that has a high moisture content. In addition the
SentrySafe Fire-Safe advanced safes close airtight to offer water
resistance, which may also cause moisture to accumulate inside
your safe. The desiccant packet included in your safe during
shipment, should be left in your safe. DO NOT DISCARD IT.
It is intended to help absorb moisture which may accumulate
inside your safe. For added protection against moisture, open
the safe periodically.
If you choose to store delicate items such as jewelry with
working parts, watches, stamps, or photos in your safe, we
recommend putting them in an air-tight container, prior to
placing them in the safe for storage.
NOTE: Sentry Group will not be responsible for any damage
or loss of items placed in the unit due to moisture.
WARNING
DO NOT store pearls in this safe unit.
In the event of a fire, potential damage to delicate pearls occurs
at temperatures much lower than the 350°F interior performance
measure which the UL classification performance standard
indicated guarantees. Therefore, DO NOT store pearls in your
SentrySafe product.
WARNING
No computer disks, audio-visual media or photo negatives.
This product in not intended to protect computer floppy or
2-1/4" diskettes, cartridges and tapes, audio or video cassettes
or photo negatives. For fire-resistant storage of these materials,
ask your retailer for the SentrySafe Fire-Safe Media storage
products.
For safes with combination
and key lock
For added security, some models have a dual-locking system
(combination lock plus key lock). NOTE: The safe will lock if
key lock cylinder is pressed in with or without key.
To unlock and open
Before dialing your combination, simply insert the key in the lock
and turn until the plunger pops out. Remove key. Press handle
down to open door.
To close and lock
You can relock the safe in two ways. With the door closed,
depress the key lock with your finger, or spin the combination
dial one full turn. For greatest security, do both. (Make sure the
door handle is in the horizontal position.)
Open unit first, then test
with door open!
(See cover of this manual for your combination.)
3-NUMBER COMBINATION
(Cannot be changed.)
Point the dial to zero.
Turn the dial to the left. Make sure ZERO passes the
pointer at least THREE times. Then stop at the first number of
your combination.
Turn the dial to the right. Stop the SECOND time you
reach the second number of your combination.
Turn the dial to the left. Stop the FIRST time the
pointer reaches the third number of your combination. Press
handle down to open door.
4-NUMBER COMBINATION
N OTE: Changing the combination voids your warranty.
To reinstate your Limited 1-Year Warranty, (valid
purchase dated receipt required) you must contact
Sentry Customer Service at 1-800-828-1438 to
document your new combination.
If Sentry is not notified of the combination change
during the Warranty period, locksmith service fees
will NOT be covered.
Point the dial to zero.
Turn the dial to the left. Make sure ZERO passes the
pointer at least FOUR times. Then stop at the first number of
your combination.
Turn the dial to the right. Stop the THIRD time you
reach the second number of your combination.
Turn the dial to the left. Stop the SECOND time you
reach the combination's third number.
Turn the dial to the right. Stop the FIRST time you
reach the last number of your combination. Press handle down
to open door.
Using an electronic
combination lock
Battery installation
To power the lock, four alkaline AA batteries, equaling
voltage: 6Vdc, (not included) are required.
NOTE: Non-alkaline and rechargeable batteries
ARE NOT RECOMMENDED.
To install batteries, slide open the battery cover located just
below the keypad. Insert a paper clip or pen point into the small
hole in the cover. Push in while sliding cover to the right. (Fig. G)
Disconnect and remove the battery holder.
Insert the 4 batteries as indicated, reconnect the connector and
put back the battery holder. Slide the cover back in place.
G
3
Publicidad
