Label on Safety Harness, which must be in place, intact and legible
5
6
1
Key to Safety Harness codes:
IK = IKAR GmbH
G = Safety Harness
1 = Single point harness
2 = Two point harness
20 = Two point harness
3 = Two point harness
A = Carbon steel "D" rings front and back, three bar quick connect buckles
B = Carbon steel "D" rings front and back, sprung loaded aluminium quick release buckles
C = Carbon steel rear "D" (NO s) rings, webbing front attachment loops
R = Overhead rescue attachment
W = Integral work positioning belt
These Safety Harness are classed as Personal Protective Equipment (PPE), by the Regulation (EU) 2016/425 and have been shown to
comply with this directive through the harmonized European standards
This instruction for use booklet covers the following IKAR GmbH products:
IK G 1 Single Point (rear "D" ring) Fall Arrest Safety Harness
IK G 2 Two Point (rear "D" ring and front chest "D" ring) Fall Arrest Safety Harness
Fall Arrest Attachment Point
Fall Arrest Attachment Point
Back "D"-Ring marked "A"
Front "D"-Ring marked "A"
while the Safety Harness is in use.
8
Fall Arrest Attachment Point
Front Loops marked with
½ "A"
ENGLISH
3
4
7
Rescue Attachment
marked "A"
11
2
9
1. Controlling Notifi ed Body
2. Serial Number
3. Product Type
4. IKAR GmbH Product References /Type / Variant
5. Standard /Year
6. Considerations for Use
7. Date of Manufacture
8. Manufacturer
9. Next revision
Work Positioning Points