IKAR HL Manual De Instrucciones página 27

Approved support structure in accordance with 2006/42/EC for the IKAR winch for loads
IKAR winch for loads (ALKO type 901)
as a component:
The winch for loads (ALKO type 901) is fastened to the
cantilever using the IKAR 41-54/AWS mounting bracket.
This requires the mounting bracket () to be attached to the
winch plate with three M10x16 screws.
Use the IKAR winch for loads (ALKO type 901) with mounted
mounting bracket. Attach the mounting bracket
to the cantilever arm with the safety bolt.
Caution: Only use IKAR mounting brackets. Only IKAR
equipment should be attached with IKAR mounting brackets.
IKAR cantilever arm type ASS-1 with ALKO type 901 and HRA 18
ENGLISH
Preparing readiness for use
27
1
2
3
5
7
4
6
8