General Safety Instructions; Regular Use In Agriculture; Safety And Prevention Instructions; Attached Machines - SIP STAR 850/26 T Manual De Usuario

Instruction for work

General safety instructions

Regular use in agriculture

The machine has been designed strictly for regular
use in agriculture.
If the machine was missused for any other purpose,
and get damaged during irregular use, manufacturer is
not liable for damages caused to the machine. It is the
user himself who bears the risk.
All conditions for work and maintenance, prescribed by
the manufacturer, should strictly be considered.
The machine may only be used, handled and repaired
by persons who are appointed to do this and who are
aware of the dangers.
All relevant safety regulations as well as all generally
used safety tehnical, working-medical and traffic
regulations should be considered during the work with
the machine.
The manufacturer is not liable for damages, caused to
the machine which has been rebuilt by the user, if
damages had occured as a result of the rebuilding.
While working with the machine pay the
greatest attention to the safety.
Prevent accidents, read and follow the
instructions contained in this manual
carefully!

Safety and prevention instructions

1. Besides the instructions from this booklet take
into consideration all generally used safety and
accident regulations!
2. Safety and warning decals, placed on the machine,
give important instructions for safe work. Take
them into consideration for your safety!
3. While driving on public roads, take into
consideration traffic signs and regulations!
4. Make sure you become familiar with all devices
and elements for handling and with the functions,
before starting with the work!
5. Avoid wearing loose-fitting clothes. Clothes should
fit tight to the user's body.
6. To avoid danger of fire, keep the machine clean!
7. Before switching on the machine and driving off,
make sure there is space near the machine. Make
sure your visibility is sufficient!
8. It is prohibited to drive persons on the machine!
9. Implements should be connected according to the
instructions, all prescribed devices fastened to
the prescribed spots and secured!
10. When disconnecting the machine from the tractor,
place it on the flat ground and use support
devices!
11. Special attention is needed when you are
connecting or disconnecting the implement to the
tractor!
12. Always place the charging weights according to
the instructions on the provided fastening points!
13. Respect prescribed pay load, axle load and
transport dimensions!
14. Transport equipment on machine and tractor is to
be tested for traffic safety before each use: lights,
protections etc!
15. Starting devices for remote control (wires, chains,
bars, etc.) should be secured in a way, that they
can not be unintentionally released during
transport or work.
16. For driving on the road, prepare and secure the
machine according to the manufacturers
instructions!
17. Never leave the tractor drivers seat during
operation!
18. Always adjust the driving speed to the driving
conditions. Avoid fast turning when driving uphill,
downhill or across the slope!
19. The performance during driving and the ability of
turning is changed, when there are implements
connected or mounted to the tractor. Pay
attention to sufficient ability of turning and
braking!
20. When turning, take into consideration the load
which is outside the centre of gravity and/or
constant weight of the implement!
21. Connect the imlement only when all safety devices
are in position and when the implement is
secured!
22. It is prohibited to be in the working and dangerous
area of the machine!
23. Stay away from the area of swinging and turning
of the machine!
24. Hidraulic flaps, doors etc. may be put in action
only when no one is in the swinging area!
25. On all parts of the machine, which are mecanically
or hydraulically driven, there is danger of shear
and squeeze!
26. Secure the implement before leaving the tractor.
Lower the implement completely. Switch off the
engine and pull out the ignition key! Disengage
the PTO shaft!
27. Nobody is allowed to be between the tractor and
the implement if the vehicle is not secured against
movement by a brake or/and by a wedge!

Attached machines

1. Secure the implements against rolling-off.
2. Consider maximal permitted charge on the hook
of attaching coupling, puuling hook or hitch.
3. If connected by a drawbar, be careful about the
sufficient flexibility in the connecting point!
4