EdilKamin MYA Air Tight Instalación Uso Y Mantenimiento página 31

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 62
fig. 1
A
A
A1
fig. 3
C
B
fig. 4
B1
C1
C
B
INSTALLATION
fig. 2
C
B
A
fig. 5
B1
C1
C
C1
C
C1
C
B
FLUE PIPE COVER KIT FOR VERTICAL
FLUE PIPES - OPTIONAL EXTRA (CODE
760660)
The kit includes the following parts:
- N° 1 flue pipe fixing bracket (A)
- N° 2 short pipe cover elements L = 25 cm (B-B1)
- N° 2 long pipe cover elements L = 50 cm (C-C1)
- N° 2 self-tapping screws 4,2x13
- N° 2 self-tapping screws 4,2x6,5
To fit the kit, proceed as follows:
- Fit the pipe cover fixing bracket (A - fig. 1) using the screws
4,2x6,5 supplied, to the two plating closers (A1 - fig. 1) at the
holes formed.
- Put a short pipe cover element on from the front (B - fig. 2)
and a long pipe cover element on from the back (C - fig. 2)
- Fix the bracket (A), installed previously, to the long pipe
cover element on the back (C) using screws 4,2x13 (fig. 3).
- Fit another long pipe cover element from the front (C1 - fig.
4) and another short pipe cover element from the back (B1 -
fig. 4) until a height of 83 cm is reached (equal to an overall
height from floor level, including the stove, of 169 cm).
- If you need to reach a height from floor level to ceiling of
270 cm, use another 4 long pipe cover elements (C-C1) code
761840 (fig. 5).
Detail of assembly of pipe cover elements
Rear elements
Front elements
- 31
-
C-B1
B-C1

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mya

Tabla de contenido