General Specifications - Klein Tools CL450 Manual De Instrucciones

ENGLISH
The Klein Tools CL450 is an automatically ranging true root mean square
(TRMS) digital clamp meter that measures AC current and Inrush
current via the clamp, AC/DC voltage, Microamps DC, Low Impedence
(Lo Z), resistance, continuity, frequency, duty cycle, capacitance, and
test diodes via test leads, and differential temperature via K-Type
thermocouple probes.
• Environment: Indoor and oudoor
• Operating Altitude: 6562 ft. (2000m)
• Relative Humidity: <80% non-condensing
• Operating Temp: 32° to 122°F (0° to 50°C)
• Storage Temp: 14° to 122°F (-10° to 50°C)
• Accuracy: Values stated at 65° to 83°F (18° to 28°C)
• Temp Coefficient: 0.1 x (Quoted Accuracy) per °C above
28°C or below 18°C, corrections are required when ambient
working temp is outside of Accuracy Temp range
• Batteries: 3 x 1.5V AAA
• Dimensions: 10.04" x 3.77" x 1.59" (255 x 96 x 40 mm)
• Weight: 13.6 oz. (386 g) including batteries
• Calibration: Accurate for one year
• Standards: Conforms to UL STD 61010-1, 61010-2-032,
• Pollution degree: 2
• Accuracy: ± (% of reading + # of least significant digits)
• Drop Protection: 6.6 ft. (2m)
• Safety Rating: CAT IV 600V, Double insulation
CAT IV: Measurement category IV is applicable to test and
measuring circuits connected at the source of the building's
low-voltage MAINS installation.
• Electromagnetic Environment: IEC/EN 61326-1. This
equipment meets requirements for use in basic and controlled
electromagnetic environments like residential properties,
business premises, and light-industrial locations.
Specifications subject to change.
2

GENERAL SPECIFICATIONS

61010-2-033.
Certified to CSA STD C22.2 No. 61010-1,
61010-2-032, 61010-2-033.
IEC/EN 61010-1, 61010-2-032,
61010-2-033, 61326-1.