schulink SPC3 Manual Del Usuario página 13

CHARGING MODE
Charging mode lets you follow the
progress through the 8 stages of charging:
1. Auto Voltage Detection – In this mode,
a battery is connected to the charger
and the charger is determining
whether it is a 6V or 12V battery.
2. Desulfation – The charger has
detected an unhealthy, sulfated battery
and has begun a special process to try
to remove the sulfation and possibly
restore the battery.
3. Soft Start – The charger has
determined the battery voltage and
gently starts to charge the battery by
slowly increasing the charging current.
4. Bulk Mode – The majority of the
energy delivered to the battery is
RESETTING YOUR PASSWORD
1. In the log in screen, press Forgot
Password. A recovery code will be
sent to the email address
you provided during registration.
2. Enter the recovery code.
3. Enter your new password.
4. Reenter the new password, for
confirmation.
5. Click Reset Password to complete the
process.
NOTE: Selecting Remember Password
allows you to quickly log in next time.
done in this mode. When the charger
exits this mode, the battery will be at
approximately 80% recharged.
5. Absorption Mode – This mode finishes
the charge of the battery by holding
the battery voltage constant until the
current tapers off.
6. Monitoring Mode – The battery is
allowed to rest for 24 hours before
checking for a loss of charge.
7. Float Mode – The charger is replacing
energy the battery has lost through
self-discharge or idle draw of the
attached vehicle.
8. Maintain – The charger checks the
battery every 12 hours and puts the
charger into float mode to replenish
lost energy from the battery.
• 13 •