Installing The App - schulink SPC3 Manual Del Usuario

12. INSTALLING THE APP

1. Before you begin, have your charger ID
card on hand.
2. Download and install the App:
"Schumacher Electric" (Apple store)
or "Schumacher Connected Charger"
(Google Play). Look for the
NOTE: For Apple devices, requires iOS 7.0
or later; Android devices, OS 4.0 or later.
3. Open the App on your mobile device.
4. When using the App for the first time,
you must complete
Registration and Activation.
5. Registration: Fill in all of the fields
on the Registration screen. Create
your password. Your password must
be between 8 and 24 characters, and
must contain characters from three of
the following four groups: lowercase
letters, uppercase letters, numbers, and
non-alphanumeric characters (! # $ % &
@ *). At least 6 of those characters may
occur only once in the password.
6. An activation code will be sent to the
email address you provided when
you registered. Enter this code on
the Activation screen. NOTE: the
Activation code must be entered
within two hours. If not activated,
you will have to reload the app.
7. After the Activation process is
complete, proceed to Add Charger to
Status. Enter the charger's ID number
and password, found on the side of the
charger or on the charger's ID card.
The password will be the last two digits
icon.
after the dash in the charger ID number
(SCHXXXXXXXX-XX). Next, create
and enter a name for your charger
(choose any name; it can be changed
later). Click on Add Charger. The App
can accommodate up to 12 different
chargers.
8. Proceed to the Charger Survey
screen. Fill in the Survey fields, and
then click on Complete Registration.
NOTE: The information you provide
in the Survey form does not affect the
charger's operation or the type of battery
it can charge.
• 9 •