Features; Control Panel - schulink SPC3 Manual Del Usuario

10. FEATURES

1
NOTE: Connecting the SPC3 charger to the internet requires the Schulink G1 Gateway,
included when purchased as a kit, or sold separately.

11. CONTROL PANEL

DIGITAL DISPLAY
The digital display indicates the
status of the battery and charger. See
Display Messages for a complete list of
messages.
NOTE: For energy efficiency during
charging, the display will go into sleep
mode and will not display any messages.
To turn the display back on, press the
display/ON button.
7
5 6
4
3
2
8
9
1. AC Power cord
2. Digital display
3. Connected (blue) LED
4. Trouble (red) LED
5. Charging/Charged (green) LED
6. Display/ON button
7. Hook attachment
8. Ring terminal quick-connect with 7.5A fuse
9. 12V accessory plug quick-connect
with 5A fuse
10. Battery clamp quick-connect
10
LED INDICATORS
BLUE (CONNECTED) LED flashing –
The charger is connected to the SEC cloud,
through the Gateway, but not yet registered.
BLUE (CONNECTED) LED solid –
The charger is connected to an active
user account.
GREEN (CHARGING/CHARGED) LED
solid – The charger is charging the battery.
GREEN (CHARGING/CHARGED) LED
pulsing – The battery is fully charged and
the charger is in maintain mode.
RED (TROUBLE) LED solid – The battery
is bad. See Aborted Charge section.
• 8 •