Approved Car Use; Installing And Removing The Easyfix; Using Isofix (Yellow Marking On The Product) And Support Leg - Maxi-Cosi Easy Fix Instrucciones De Uso

GB

2. APPROVED CAR USE

The EasyFix is approved for 2 types of car use:
Installation with Isofix and support leg (see section 3.1);
For use in cars with approved Isofix anchor points (see Section 9: Car fitting list). Recognisable by the
yellow marking on the product and the yellow marking in the instruction manual.
ór
Installation using 3-point safety belt and support leg (see section 3.2);
For use in cars "fitted" with an automatic 3-point safety belt approved in accordance with ECE R16 or
equivalent standard (see Section 9: Car fitting list). Recognisable by the blue marking on the product and
the blue marking in the instruction manual.

3. INSTALLING AND REMOVING THE EASYFIX

3.1 Using Isofix (yellow marking on the product) and support leg

If your car is equipped with Isofix anchor points, you can install the EasyFix using the Isofix connectors in
combination with the support leg. To check whether your car is suitable for Isofix attachment and the
support leg, see Section 9: Car fitting list.
Isofix class E
* Check car fitting list
10
English
•
Installed on seats fitted with Isofix
anchor points (located between seat
and seat back) & with room for the
support leg
•
Isofix installation marking
•
Frontal airbag
•
Side airbag
Yes*
Yellow
No
Yes