Using A 3-Point Safety Belt (Blue Marking On Product) And Support Leg - Maxi-Cosi Easy Fix Instrucciones De Uso

3.2 Using a 3-point safety belt (blue marking on product) and support leg

If your car is not equipped with Isofix anchor points, you can install the EasyFix using a 3-point safety belt
in combination with the support leg. To check whether your car is suitable for installation using a 3-point
safety belt and support leg, see Section 9: Car fitting list.
* Provided there is a 3-point safety belt in the middle position of the back seat and there is enough room
for properly installing the support leg (see Section 9: Car fitting list).
Only install the EasyFix on a forward-facing seat fitted with an automatic 3-point safety belt approved in
accordance with ECE R16 or equivalent standard.
The proper threading of the seat belt is essential to your child's safety. The seat belt must be threaded
along the blue markings on the EasyFix. See the sticker outlined in blue on the topside of the EasyFix.
Never thread the belt in any other way!
Instructions for use
3
1 1
2
• Installation with 3-point safety belt
• Installation with 2-point safety belt
2
• On passenger seat
• On left/right side of back seat
• In middle position of back seat
• Belt routing marking
• Frontal airbag
• Side airbag
GB
Yes
No
Yes
Yes
Yes*
Blue
No
Yes
13