Use Of Extension Cord - Metabo HPT CJ 90VST2 Manual De Instrucciones

English

USE OF EXTENSION CORD

Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to
carry the current your product will draw.
An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table shows the correct
size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller
the gage number, the heavier the cord.
Ampere rating
More Not more
than than
0 – 6
6 – 10
10 – 12
12 – 16
WARNING
Avoid electrical shock hazard. Never use this tool with a damaged or frayed electrical cord or extension
cord.
Inspect all electrical cords regularly. Never use in or near water or in any environment where electric
shock is possible.
SAVE THESE INSTRUCTIONS
MAKE THEM AVAILABLE TO
6
MINIMUM GAGE FOR CORD SETS
Total Length of Cord in Feet (Meter)
0 – 25
(0 – 7.6)
18
18
16
14
OTHER USERS
OWNERS OF THIS TOOL!
26 – 50
(7.9 – 15.2)
AWG
16
16
16
12
AND
AND
51 – 100 101 – 150
(15.5 – 30.5) (30.8 – 45.7)
16
14
14
Not recommended
14
12
12