Safety - Fronius TTB 80 G Manual De Instrucciones

Safety

Safety
Danger from incorrect operation and work that is not carried out properly.
This can result in severe personal injury and damage to property.
► All the work and functions described in this document must only be carried out by
► Read and understand this document.
► Read and understand all the Operating Instructions for the system components, espe-
Danger from electrical current and danger of injury from emerging wire electrode.
This can result in severe personal injury and damage to property.
► Switch the power switch on the power source to - O -.
► Disconnect the power source from the grid.
► Ensure that the power source remains disconnected from the grid until all work is com-
Danger from electrical current.
This can result in severe personal injury and damage to property.
► All cables, leads, and hosepacks must always be securely connected, undamaged,
Burning hazard due to hot welding torch components and coolant.
Serious burns may result.
► Allow all welding torch components and the coolant to cool down to room temperature
Risk of damage from operation without coolant.
Serious damage to property may result.
► Never use water-cooled welding torches without coolant.
► The manufacturer is not responsible for any damage resulting from improper use. All
Danger from coolant escaping.
This can result in severe personal injury and damage to property.
► When disconnecting a welding torch from the cooling unit or wirefeeder, always seal
WARNING!
trained and qualified personnel.
cially the safety rules.
WARNING!
plete.
WARNING!
correctly insulated, and adequately sized.
CAUTION!
(+25 °C or +77 °F) before starting any of the work described in these Operating Instruc-
tions.
CAUTION!
warranty claims are considered void in such cases.
CAUTION!
the coolant hoses using the plastic seal attached to the torch.
35