Maintenance And Repair - Kerbl 1418 Instrucciones De Uso

3.2.8. After every use the milk heater has to be cleaned. The heating element can be cleaned with a brush and lukewarm
soapy water. For cleaning the handle, please use a soft cloth that has to be free of any solvents (acetone, petrol, alcohol,
etc.).

4. Maintenance and repair

The milk heater is maintenance-free.
In case of a malfunction the unit has to be stopped immediately. In case the milk heater has to be repaired, consult a
qualified electrician or send the unit back to the manufacturer. Even a defective connecting cord must only be replaced
by the manufacturer or a qualified electrician.
5. Technical data (1418, 1420, 1421)
power consumption:
voltage:
protection:
weight (1418, 1420):
weight (1421):
6. CE-symbol/CE-conformity declaration
Albert KERBL GmbH herewith declares that the product/machinery described in these instructions conforms with the
basic requirements and the other relevant conditions of regulations 2004/108/EG and 2006/95/EG.
The CE-symbol stands for fulfilment of the European Union guidelines.
The conformity declaration can be viewed at the following Internet address: http://www.kerbl.de
7. Electronic scrap
Disposing of this device after its service life is the responsibility of the operator. Please consult the valid
national regulations. The device must not be disposed of in household waste. In accordance with the
stipulations of the EU Directive on the Disposal of Electrical and Electronic Devices, the device can be
disposed of free of charge at the local waste collection or recycling centre. Alternatively, it can be returned
to retailers who offer a collection service. The proper disposal helps to ensure environmental protection and
prevents any adverse effects on human health and the environment.
2300W
230V
IPX 7
4.6 kg
3.8 kg
5