Safety Warnings; Symbols - Festool CTL SYS Manual De Instrucciones

Contents
1 Safety warnings.........................................11
2 Symbols..................................................... 11
3 Intended use..............................................12
4 Technical data........................................... 12
5 Parts of the machine.................................12
6 Commissioning..........................................12
7 Settings......................................................13
8 Working..................................................... 13
9 Service and maintenance..........................14
10 Troubleshooting........................................ 14
11 Transportation...........................................15
12 Environment.............................................. 15
13 EU Declaration of Conformity................... 15
1

Safety warnings

Warning! Read and observe all instruc­
tions and safety warnings. Failure to observe
the instructions and safety warnings may lead
to electric shocks, fires and/or serious injuries.
Keep all safety warnings and instructions for
future reference.
- This appliance must not be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge. Children need
to be supervised to ensure they do not play
with the device.
- Warning Device may contain hazardous
dust. Only have the device maintained and
emptied, and only have the filter replaced
by an authorised specialist using suitable
protective equipment.
- Always operate with the filter system in­
stalled!
WARNING
This machine is only intended for dry appli­
cations.
CAUTION
This machine is only intended for indoor ap­
plications. This machine must always be
stored indoors.
Risk of explosion and fire: Do not extract:
-
- Sparks or hot dust;
- combustible or explosive materials (e.g.
magnesium, aluminium, petrol, diluting
agents);
- aggressive materials (e.g. acid, alkaline
solutions, solvents);
- chemically reactive materials, which lead
to the generation of heat, acids/bases,
gases, etc. (e.g. reactive two-component
materials, aluminium and water).
- Observe all national safety regulations as
well as the material manufacturer's speci­
fications!
- Always use suitable protective equipment!
- If intact following a visual inspection, work
in a dry environment according to instruc­
tions!
- Only use the electrical outlet module on the
device for its stated purpose.
- Check the plug, cable and socket regularly
to avoid hazards and have them replaced by
an authorised after-sales service workshop
if they become damaged.
- Do not lift or transport the device using a
crane hook or lifting gear.
- Risk of tilting, do not place on sloped areas!
2

Symbols

Symbol Meaning
Warning of general danger
Risk of electric shock
Read the operating manual and
safety warnings.
Wear a dust mask.
Tip or advice
Handling instruction
Warning! The machine may contain
hazardous dust!
Climbing prohibited
Do not leave in the rain!
English
11