Fitting/Removing Attachments - Zoofari ZTB 1500 A1 Instrucciones De Uso

Fitting/removing attachments

GB
MT
Maintenance
Carrying out maintenance
74
WARNING
Risk of burns from hot air!
► Use the attachments (
Switch the appliance off (Blower level switch 5 in position 0).
Select an appropriate attachment ( 7, 8 or 9).
Turn the attachment so that the arrow marking IN on the attachment (7, 8, 9)
points downwards.
Slide the attachment 7, 8 resp. 9 from the top to the bottom in the two
guide grooves on the air outlet opening 6 of the appliance.
NOTICE
► Ensure that the guide lugs on the attachment (
guide grooves in the appliance.
► Pay heed to the two arrow markings (
► Slide the attachment (
To remove it, slide the attachment 7, 8 resp. 9 upwards out of the guide
grooves on the air outlet opening 6 of the appliance (Arrow marking OUT).
DANGER
Risk of potentially fatal electrical current!
► Remove the plug from the mains power socket before beginning with
maintenance.
Regularly remove dust and hair from the air intake opening 2 and from the
air outlet opening 6 of the appliance.
NOTICE
► A clogged/dirty air intake opening
overheating of the appliance. In this case the appliance will be automatically
switched off by the built-in overheating protection.
7, 8, 9) ONLY in conjunction with blower level 1!
IN/OUT) on the attachment (7, 8, 9).
7, 8, 9) up to the fi nal position of the guide grooves.
2 or air outlet opening 6 can lead to
7, 8, 9) fi t exactly into the
ZTB 1500 A1