Electrical Connection; Operation - Franke Maris Free by Dror MA 82 M CD/F Manual Del Usuario Y De Instalación

EN

Electrical connection

FRANKE ovens are supplied with a three-pole power
cable with free terminals.
The connection
polarities of the
free terminals are
respected:
Brown = Line
Blue = Neutral
Yellow / Green =
Earth
Make sure the characteristics of the household
X X
electrical system (voltage, maximum power and
current) are compatible with those of the oven.

OPERATION

This oven combines the advantages of "static"
natural convection ovens with those of modern "fan"
ovens. It is a very versatile appliance which enables
safe and easy selection of 8 different cooking
methods. Use knobs (A) and (D) on the control panel
to select the required programmes and temperature.
For best use of your Franke oven, consult the
cooking table on page 11.
Cooling fan
In order to reduce the temperature at the door,
control panel and sides, the Franke oven is equipped
with a cooling fan which is automatically activated
when the oven is hot. When the fan is on, air blows
from the front of the oven between the front panel
and oven door; special attention has been given
to ensure that the exiting air does not disturb the
kitchen environment and that noise is kept to a
minimum.
blue
yellow/green
brown
MA 82 M _/F
If the oven is to be permanently connected to the
power supply:
Install a device that enables disconnection from
X X
the power supply, with a contact opening distance
(3 mm) that ensures complete disconnection in
category III overvoltage conditions.
Ensure the following:
X X
– The plug and the socket are suitable for a 16 A
current.
– The plug and the socket can be easily reached
and are positioned so that no live part is
accessible when inserting or removing the plug.
– The oven does not rest against the plug when
installed in the cabinet.
– A 3 x 1.5 mm
when replacing the power cable.
To protect kitchen units, the fan keeps running
after cooking until the oven has sufficiently
cooled down.
Oven light
This symbol corresponds to switching on of the oven
light without activation of any type of heating. This
option is useful for cleaning the oven when it is not in
function, to see the cooking
– 8 –
H05V2V2-F type cable is used
2
compartment.