GB
GB
GB
GB
GB
0 0 0
Σ m
3
> 400 mm
> 400 mm
> 400 mm
> 400 mm
> 400 mm
14
14
14
14
14
> 20 mm
> 20 mm
> 20 mm
> 20 mm
> 20 mm
> 1 m
> 1 m
> 1 m
> 1 m
> 1 m
Installation conditions
Installation conditions
Installation conditions
Installation conditions
Installation conditions
Observe all applicable installation regulations, gen-
eral guidelines and technical specifications.
There must be a flush of at least 3.5m
backwashing. The pressure downstream of the
filter during backwashing must be at least 2.5 bar.
A connection to the sewage system (min.
A connection to the sewage system (min.
A connection to the sewage system (min.
A connection to the sewage system (min.
A connection to the sewage system (min.
DN 50)
DN
DN
50)
50) must be available for draining the flush-
50)
must be available for draining the flush-
must be available for draining the flush-
must be available for draining the flush-
DN
DN
50)
must be available for draining the flush-
ing w
ing w
ater
ater. . . . .
ater
ing water
ing w
ing w
ater
There must be a 230V/50Hz mains socket
There must be a 230V/50Hz mains socket
There must be a 230V/50Hz mains socket
There must be a 230V/50Hz mains socket
There must be a 230V/50Hz mains socket
within 1.2m to provide the unit with electrical
within 1.2m to provide the unit with electrical
within 1.2m to provide the unit with electrical
within 1.2m to provide the unit with electrical
within 1.2m to provide the unit with electrical
po
po
pow w w w w er er er er er. . . . .
po
po
The installation site must be protected against frost
and must guarantee the protection of the filter from
solvent vapors, fuel oil, lees, chemicals of all types,
UV irradiation, and heat sources over 40°C.
Note: Keep plastic parts free of oil, grease,
Note: Keep plastic parts free of oil, grease,
Note: Keep plastic parts free of oil, grease,
Note: Keep plastic parts free of oil, grease,
Note: Keep plastic parts free of oil, grease,
solvents, and acid or alkaline cleaning agents.
solvents, and acid or alkaline cleaning agents.
solvents, and acid or alkaline cleaning agents.
solvents, and acid or alkaline cleaning agents.
solvents, and acid or alkaline cleaning agents.
After hard collisions and impacts (e.g. with
After hard collisions and impacts (e.g. with
After hard collisions and impacts (e.g. with
After hard collisions and impacts (e.g. with
After hard collisions and impacts (e.g. with
unsuitab
unsuitab
le tools
le tools
, f , f
, f
alls onto stone floor
alls onto stone floor
unsuitab
unsuitab
unsuitable tools
le tools
le tools, f
, falls onto stone floor
alls onto stone floor
alls onto stone floor, etc.) a
plastic part must be replaced, even if there is
plastic part must be replaced, even if there is
plastic part must be replaced, even if there is
plastic part must be replaced, even if there is
plastic part must be replaced, even if there is
no visible damage (danger of bursting). Avoid
no visible damage (danger of bursting). Avoid
no visible damage (danger of bursting). Avoid
no visible damage (danger of bursting). Avoid
no visible damage (danger of bursting). Avoid
extreme pressure blows.
extreme pressure blows.
extreme pressure blows.
extreme pressure blows.
extreme pressure blows.
3
per hour for
, etc.) a
, etc.) a
, etc.) a
, etc.) a