GIESSE VARIA SLIM RADIO Manual De Uso página 43

I. Rotate the actuator 90°, bring the chain terminal up
to the bracket and insert the pin into the opening on
the bracket. Insert the safety clip into the bracket.
J. Check that the exit on the chain is perfectly aligned
with the bracket. If the chain is not aligned with the
bracket, loosen the fixing screws and reposition the
bracket correctly.
K. Check all electrical connections with the diagram on
the label attached to the lead and in conformity to
indications on chapter 9 – Electrical connection.
L. Carry out a complete check of opening and closure
of the window. Once the closure phase has been
completed, check that the window frame is
completely closed by checking the pressure on the
weather strips.
14.4. Assembly of actuator onto bay or outward opening window.
Aside the drawing of specific application using
accessories provided. For different mountings,
please contact manufacturer.
A. Pencil in an "X" over the centre line of the window
frame (fig. 12).
B. Select the correct form of brackets (fig. 13).
C. Fold the template along the green dotted line and
keep in position at 90°. Attach one part to the
window frame (fixed part), taking care to line up the
axis with the "X" previously pencilled in on the
central line and line the folded part up against the
moveable part of the frame. Warning: as various
different applications are possible, place the actuator
in a central position and adjust the positions of the
brackets, taking care to keep the actuator aligned
with the window section.
D. Bore holes into the window frame at the points
indicated (fig. 14).
E. Mount the bracket for outward opening windows onto
the moveable part of the frame in accordance with
the markings indicated on the template.
F. Complete assembly of the chain terminal with the
safety clip inserted onto the provided pin Ø4x32 in
median position (see fig. 15).
G. Mount the two brackets on to the sides of the
actuator.
H. Position the actuator onto the window frame and line
up with the holes bored earlier. Fix the actuator.
I. Bring the chain terminal up to the bracket and insert
43
Figure 10
Figure 11
Vertical assembly on outward
opening
Figure 12
Figure 13