RK Rose+Krieger SLZ 63 Manual De Servicio página 42

1. Declaration of incorporation
Sources for the harmonised standards according to article 7, paragraph 2:
EN ISO 12100:2010-11
Source of the other technical standards and specifications applied
Austrian Standard (ÖNORM) EN ISO 13857:2008-08-01
The manufacturer or the person authorised are obliged to hand over the special documents for
the partially completed machine to the national authorities on reasoned request. This
transmission is carried out electronically.
The commercial protective rights remain unaffected by this!
Important note! The partially completed machine must not be put into operation, until, if
required, it has been determined that the machine in which the partially completed machine is to
be installed complies with the regulations of this guideline.
Minden / 24.01.2017
Location / Date
Minden / 24.01.2017
Location/Date
42
Safety of machinery – General principles for design – Risk assessment and
risk reduction (ISO 12100:2010)
Safety of machinery – Safety distances to prevent hazard zones being
reached by upper and lower limbs (ISO 13857:2008)
Signature
Signature
Technical Director
Signatory's position
CEO
Signatory's position