Replacing The Starter Rope And Rewind Spring - Stihl HT 75 Manual De Instrucciones

English
Installing the Spark Plug
Screw the spark plug (3) into the
N
cylinder and fit the boot (2) (press it
down firmly).
70
Replacing the Starter Rope
and Rewind Spring
Removing the Starter Cover
2
3
Take out the screws (1).
N
Lift the cover (2) away from the
N
tank (3) and pull it out from under
the shroud (4).
1
4
2
1
1
3
Removing the Rope Rotor
5
Take out the screw (5) and remove
N
the rope rotor.
WARNING
The rewind spring is seated in the rope
rotor and may pop out and uncoil if care
is not taken. The pieces of broken spring
may be under tension and fly apart
unexpectedly when you remove the rope
rotor – to help reduce the risk of injury,
wear a face shield and work gloves.
HT 75